Vessel data configuration using proAIS2
For configuration purposes only, it is possible to power the AIS transceiver using USB only. This is useful if you wish to configure your AIS transceiver away from the vessel power supply. The AIS transceiver will not transmit or receive any data whilst powered by USB only.
You will require the following information in order to configure your AIS transceiver:
MMSI
Vessel name
Vessel type
Vessel dimensions and position of your GPS antenna installation
| CAUTION | |
| Ensure that you enter all vessel data accurately. Failure to do so could result in other vessels failing to identify your vessel correctly. The vessel MMSI can only be configured once using proAIS2. If you need to change the MMSI for any reason, contact your dealer or support@em-trak.com and provide the product serial number, current MMSI number and new MMSI number. |