Silent mode
There may be situations where you need your X100 to stop broadcasting your location, for example if you have found a good fishing area that you don't want to share.
To enable SILENT MODE, from SETTINGS, select AIS, and then SILENT MODE.
Below shows you how to enable silent mode.
You can choose from three settings:
- DISABLED - SILENT MODE is off, and your vessel's position will be broadcast periodically.
- CONTINUOUS - SILENT MODE is on and remains active until you manually change the setting.
- TIMER - Selecting TIMER activates the SILENT TIMER, which enables SILENT MODE for a set duration. The timer is adjustable in 30-minute intervals, allowing you to temporarily stop broadcasting your position for a specific period.