Rear connectors
All the connectors are located on the back of the X100. This is where you’ll connect the GPS and VHF antennas, the power cables, Wi-Fi and Bluetooth antennas, NMEA, and make the loud hailer connections.
| No. | Connector Type | Description |
|---|---|---|
| 1 |
External Wi-Fi Bluetooth antenna |
External Wi-Fi/Bluetooth antenna This is where you’ll connect the included Wi-Fi or Bluetooth antenna to link your smart devices to the radio. |
| 2 |
VHF antenna |
VHF antenna Connect the VHF antenna here so you can communicate with other people on the water. |
| 3 | NMEA2000 | NMEA2000 Connect the NMEA2000 devices here, so all of your on board sensors and devices are linked. |
| 4 | Red power cable + | Red Power + This is the positive power cable, make sure to connect to a supply that gives between 9.6 and 31.2V. |
|
Black power cable - |
Black Power - This is the negative power cable, make sure to connect to a power supply that gives between 9.6 and 31.2V. | |
|
NMEA0183 |
NMEA0183 Connect the NMEA0183 devices here, so all of your on board sensors and devices are linked. | |
|
Loud hailer |
Black and White Loud hailer Connect your loud hailer here, once connected the fist-mic can be used to talk through the hailer. | |
| 5 | External GPS antenna | External GPS antenna Connect any external GPS antenna here to keep track of your location. |