The following configuration command will enable the B330 to multiplex any received NMEA 0183 data over Wi-Fi:
$PSMT,0,3,0x2C75B2FA,0,nvseti "nmea1mux"^2C0x2^2C2^2C0^2C0,0*78
It can be sent using the Serial Data tab of proAIS2.
The following configuration command will enable the B330 to multiplex any received NMEA 0183 data over Wi-Fi:
$PSMT,0,3,0x2C75B2FA,0,nvseti "nmea1mux"^2C0x2^2C2^2C0^2C0,0*78
It can be sent using the Serial Data tab of proAIS2.